Digital Broadcaster User Manual v. 3.4 rev. 3421 1 July 24, 2008
Safety Requirements
The following safety instructions apply to TelVue’s Digital Broadcaster.
1. Read and follow all warning notices and instructions marked on the product or
included in this manual. Opening or removing covers and/ or components may expose
you to dangerous high voltage points or other risks. Qualified personnel should
perform all servicing.
2. The maximum ambient temperature for the Digital Broadcaster is 90 degrees
Fahrenheit. Care should be given to allow sufficient air circulation or space between
units when the Digital Broadcaster is installed in a closed or multi-unit rack assembly.
3. Installation of the Digital Broadcaster in a rack without sufficient airflow can be
unsafe.
4. If the Digital Broadcaster is installed in a rack, the rack should safely support the
combined weight of all equipment it supports.
5. The Digital Broadcaster’s internal AC power supply input is intended to be used with
the three-wire grounding type plug (a plug that has a grounding pin). This is a safety
feature. Do not defeat the purpose of grounding type plugs by modifying the plug or
using an adapter.
6. Do not allow anything to rest on the power cord. Do not locate the product where
persons can walk on or come in contact with the power cord.
7. Determine that the cumulative power requirements of the Digital Broadcaster plus
other equipment in the rack do not overload the supply circuits and/or wiring.
8. If using a power strip or similar supply, make sure the power requirement of the
chassis, plus the cumulative power draw of any other equipment in the rack, do not
overload the supply circuit.
9. There is danger of explosion if the motherboard battery is incorrectly replaced. A
lithium battery on the Digital Broadcaster motherboard provides backup power for its
internal clock. The battery has an estimated life expectancy of ten years.
Kommentare zu diesen Handbüchern