Evido EAD-D2000 Handbuch PDF herunterladen (Seite 50)

If you are ready with the USB wireless LAN device, follow the steps below.

1. Insert the USB wireless LAN device into the encoder or IP camera.

2. After a few seconds, click the ‘Refresh Network List’ and you can see that the device is

listed on the window.

3. Click the device you want on the list. Then, the device information such as ESSID, mode,

MAC address, channel, and encryption are shown on the right side of the list window.

4. Click the ‘Copy to user setting’ button and the chosen device information is copied on

‘Networks to connect’ section of below.

Note

If ‘Not connect wireless….’ message is displayed after clicking the ‘Refresh Network

List,’ please check the setting of your wireless AP/router. Also make sure the USB

wireless LAN card is mounted on the unit properly.

If you have completed the recognition of the USB device for wireless LAN at the step1, you can

find that the ‘Network name, Mode, Authentication, and Encryption’ are filled automatically

according to the wireless LAN device information.

1. Type the ‘Network key’ and confirm it. The network key should be equal to the AP or

client PC you will communicate.

2. Set the Time out and Retry count referring to the explanation of below.

Time out - When there’s no answer from the server for time out seconds, it means it

failed connecting to the server and you need to try to connect again.

Retry count – The number of retrial connections when there’s no answer from the

server.

Note

The current time out or retry count is not renewed automatically. Try to renew the

page manually to see if the network is connected properly.

3. Set the wireless network IP configuration. If your mode is Ad-Hoc, only static IP setting

is allowed.

IP configuration by DHCP - Get the IP address from DHCP automatically.

Manual IP configuration – Get the IP address with the manual setting. If your mode is

infrastructure (AP) networks, you should check out the range of IP address.

4. If you have completed the configuration of above, you can save or try to connect the

wireless LAN with button of Apply and Reset.

Apply – Save the current setting and apply them.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 95 96

Keine Kommentare

Evido EAD-D2000 Handbuch Seite 50