Evido EAD-B1000 Bedienungsanleitung PDF herunterladen (Seite 64)

TelVue HyperCaster

User Manual / v4.3 / July 2014

HyperCaster

is a registered trademark of TelVue Corporation 800-885-8886 / www.telvue.com

• Name – Enter a short, descriptive name for the channel.

• Description – Enter a longer description about the channel that will distinguish it from the

others at your installation.

• TV Guide Station ID – If your installation submits schedules to TV Guide in X-List format,

enter your station ID.

• Switch Output – (For systems with a switch) Select a switch output for this channel from the

drop-down list.

• Switch Input – (For systems with a switch) Select a switch input for this channel from the

drop-down list, if applicable.

• Output Format – (HD-SDI) Select an output format from the drop-down list.

• Destination IP Address – (IPTV) This is initially blank or set to a local IP address. Enter the

IP address of the device where you want the stream to play.

• Destination IP Port – (IPTV) Enter a port number not used by any other streaming

applications that may send networked data to the video server.

• Bit Rate – (ASI and IPTV) You can select a bitrate standard, or enter your own choice for the

bit rate. The bitrate you select or enter is displayed in the box. Files that exceed this rate as

their total mux rate cannot be played on the channel. The options you can pick from for a pre-

defined bit rate standard include:

CableLabs SD: 3.75 Mbps

CableLabs HD: 19 Mbps

ATSC: 19.396285 Mbps

• Program Map Table – (IPTV) This feature is for advanced users. Depending on your

program map table the files and transport stream sources that play from your server will be

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 102 103

Keine Kommentare

Evido EAD-B1000 Bedienungsanleitung Seite 64